9 Maintenance
9.1 Cleaning filter
The maintenance for the user is limited to the periodic cleaning or replacement of the fi lters. The fi lter only has to be
cleaned if this is indicated on the display (the fi lter symbol is shown here)
if a multiple switch with fi lter indication
has been installed and the red LED of the switch is on.
The fi lters should be replaced each year. After the fi lter has been cleaned 3 times, it must be replaced by the 4th time.
The appliance must never be used without fi lters.
Cleaning and replacing the filters:
Press the fi lter symbol
r longer than 3 seconds to open the fi lter wizard.
Now follow the instructions that appear on the display to clean and/or replace the fi lter.
This fi lter wizard cannot be interrupted.
When all the instructions on the menu have been followed and confi rmed, then the fi lter wizard is closed by pres-
sing the “Home” button and the display then returns to the main screen; the fi lter message is reset and the fi lter
message now disappears.
Comment:
If the fi lter wizard is opened in order to replace the fi lter whilst there is no fi lter message on the display screen, go in
the settings menu to step number 4.2 to open the fi lter wizard. Now follow the instructions on the display, and once
fi nished the timer of the fi lter message is reset. It is also possible to go in the settings menu using step number 4.3 to
reset the fi lter directly without opening the fi lter wizard; if “Yes” is chosen then in the settings menu this step number has
to be left again by pressing “Home” button or the " return" button . The timer of the fi lter message is then reset!
Pressing the Home button brings you back to the main screen from any particular menu; pressing the return
button takes you back 1 step in the menu.
9.2 Maintenance siphon
Cleaning the siphon
Every year the siphon must be disconnected and cleaned.
(For example a Ubifl ux Vigor appliance type 4-0)
30 | Art.-nr.:
616711-A
Ubifl ux Vigor W225 | 31
