A = Ubifl ux Vigor appliance (For example a Ubifl ux Vigor appliance type 4-0)
B = 4-way switch with fi lter indication
C = Modular cable:
Note:
For the modular cable that is used, the “tab” of both modular connectors must be mounted
facing the mark on the modular cable. Wire colors C1 - C6 may vary dependent on the type of
modular cable used.
A = Ubifl ux Vigor appliance (For example a Ubifl ux Vigor appliance type 4-0)
B = Receiver for wireless remote control
C = Transmitter with 4 settings (for example kitchen)
D = Transmitter with 2 settings (for example bathroom)
E = Any additional 2- or 4-settings transmitters (maximum of 6 transmitters can be signed on to
1 receiver)
F = Modular cable:
Note:
For the modular cable that is used, the “tab” of both modular connectors must be mounted
facing the mark on the modular cable. Wire colors C1 - C6 may vary dependent on the type of
modular cable used.
11.1.1 Connecting position switch with filter indication
11.1.2 Connecting wireless remote control (without filter indication)
38 | Art.-nr.:
616711-A
Ubifl ux Vigor W225 | 39
