Ubiflux W300(+) / W400(+) / W450+
34
33
Ubiflux W300(+) / W400(+) / W450(+)
E2365-A.pdf 26-1-2011 14:26:21
Chapter 11
Electric connections accessories
11.2 Connection examples multiple switch
Wire colours C1 - C6 may vary dependent on
the type of modular cable used.
Note: For the modular cable use, the “tab” of both modular connectors must be
mounted facing the mark on the modular cable.
E2365-A.pdf 26-1-2011 14:26:21
A = Ubiflux
B = Receiver for wireless
remote
control
C = Transmitter with 4 settings
(e.g.
kitchen)
E = Any additional 4-settings transmit-
ters (A maximum of 6 transmitters
can be signed on to 1 receiver)
E2365-A.pdf 26-1-2011 14:26:21
A = Ubiflux
B1 = Multiple switch with filter indication
B2 = Additional multiple switch with filter indication
C = Splitter
A = Ubiflux
B = Multiple switch with filter indication
C = Receiver for wireless remote control
D = Transmitter with 4 settings
E = Splitter
E2365-A.pdf 26-1-2011 14:26:21
E2365-A.pdf 26-1-2011 14:26:21
A multiple switch can be connected to the modular connector X2 of the Ubiflux. This modular connector X2 is directly accessible at
the rear of the display cover (see §11.1) without having to take it off.
230 V
50 Hz
230 V
50 Hz
230 V
50 Hz
230 V
50 Hz
11.2.1 Multiple switch with filter indication
A = Ubiflux
B = Multiple switch with filter indication
11.2.2 Wireless remote control (without filter indication)
11.2.3 Additional multiple switch with filter indication
11.2.4 Additional multiple switch with wireless
remote control
D
E2365-A.pdf 26-1-2011 14:26:21
