6.2 Display layout
The screen is divided up into 6 zones where various symbols/displays can be shown per zone.
Layout of main screen
1 = Navigation screen
2 = Notification screen
3 = Screen with main function
4 = Connectivity information
5 = Time
6 = Date
The various symbols can be shown on the display. This depends on the screen that is shown, the version of the
appliance and any connected accessories.
Zone
no.
Symbol on display
Description
1
By pressing here you get access to the information menu; here one can only read out values. It is
not possible to change these values.
By pressing here you get access to the settings menu. In this menu you can change the various
values. For all setting values of standard appliance (
®
Setting values standard appliance
page 51).
The Plus version of the appliance has various setting values (
®
Setting values appliance with Plus
page 54).
Caution: Incorrect settings can disrupt the operation of the appliance!
Use these arrows to go up or down the various menus or to increase or decrease the values of the
relevant settings.
This arrow takes you back one step in the menu.
This takes you back to the main screen.
2
Filter message symbol; this is only shown if the filter has to be cleaned or replaced. See chapter
"Filter cleaning" (
®
page 29) for more information.
This symbol is only shown if a fault has occurred in the appliance; see chapter Faults (
®
page 26) for more information.
Ubiflux Vigor W325 615743-G
