Ubee Interactive
Introduction
Ubee DDM3521 Cable Modem User Guide • February 2013
7
1.6
Understanding the DDM3521 Back Panel
All ports to connect the device are located on the back panel. The following image and
table describe the device’s back panel connections.
Back Panel Label
Description
PWR
Connects to the power adapter. WARNING: Use only the power
adapter shipped with this device. Failure to do so may cause
damage to the device.
ETHERNET
Connects an Ethernet device such as a computer, gaming console, or a
router/hub to the Internet using a standard RJ45 Ethernet cable. See the
Understanding the Customer Premises Network on page 4
for more
information.
RESET
Resets the device. Insert a pointed object into the opening. Press for less
than10 seconds to power cycle the device. Press for more than 10 seconds
to reset the device to the factory defaults.
CABLE
Connects to the coaxial cable (not included) that comes from the cable wall
outlet or cable splitter (not included).
