Ubee Interactive
4.2.10 Advanced Gateway Setup - Port Filtering
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010
39
3. Click
IP Filtering
from the left side of the screen. The
IP Filtering
fields are
explained following this screen example.
4.2.10
Advanced Gateway Setup - Port Filtering
The
Port Filtering
option allows you to configure port filters in order to block specific
internet services on specific ports to all devices on the LAN.
1. Access the web interface. Refer to
page 14
, if needed.
2. Click the
Gateway
link from the top of the screen.
3. Click
Port Filtering
from the left side of the screen. The
Port
Filtering
fields are
Label Description
Start Address
Enter the start IP address.
End Address
Enter the end IP address.
Enabled
Select Enabled to activate the rule.
Apply
Click Apply to save all screen changes.