|
Ubee Interactive 2011
14
WEP
WEP encryption is disabled by default. Recommend
leaving WEP disabled since it is not secure or efficient.
WPS
Enabled by default, but recommend disabling it due to
inconsistent wireless client implementations.
3.4
WIRELESS
W
IRELESS
R
ADIO
Label
Description
Wireless Interfaces
Displays the Wireless name / MAC address.
Wireless
Displays the wireless radio’s status, Enabled or Disabled.
Country
Select
UNITED STATES
Output Power
Always Select
100%
802.11 Band
You can choose 2.4Ghz
or
5 Ghz,
not both
concurrently
. ALL wireless client adapters MUST
support 5GHz, if you decide to use 5GHz only.
Note
: The distance and coverage for 5Ghz is less than
2.4Ghz, but because there (currently) tend to be fewer
5GHz Wireless Access Points, this may be an option.
802.11 n-Mode
Select Auto to use 802.11 n mode when possible. This
mode has a significant increase in the maximum raw OSI
physical layer data rate from 54 Mbit/s to a maximum of
600 Mbit/s with the use of four spatial streams when at a
channel width of 40 MHz.
One spatial stream at 20MHz wide channel will enable
72.2Mbps maximum data rate in 802.11n mode.