Using the Port Triggering Option
Ubee Interactive
52
Ubee DDW3611 Wireless Cable Modem Gateway Subscriber User Guide • November 2012
4. Only John can connect to the Real Audio server until the connection is closed or times
out.
Steps
To set up port triggering:
1. Click
Gateway
from the main menu.
2. Click
Port Triggering
from the left side menu. Fields are described following the
screen example.
Label Description
Trigger Range
Defines the trigger port or a range of ports that trigger the
router to record the IP address of the LAN computer that sent
the traffic to a server on the WAN.
Start Port
Defines a port number or the starting port number in a range
of port numbers.
End Port
Defines a port number or the ending port number in a range of
port numbers.
Target Range
Defines a target range port or a range of ports a server on the
WAN uses when it responds to service requests. The router
forwards the traffic with this port (or range of ports) to the
client computer on the LAN that requested the service.
Start Port
Defines a port number or the starting port number in a range
of port numbers.
End Port
Defines a port number or the ending port number in a range of
port numbers.
Protocol
Defines the protocol type for this rule, UDP, TCP, or Both.
Enable
Activates this rule when checked.
Apply
Saves all screen changes when clicked.