Ubee Interactive
Using the Wireless Radio Option
Ubee DDW3611 Wireless Cable Modem Gateway Subscriber User Guide • November 2012
59
6.1.1
Scanning for Wireless Access Points (APs)
You can search for wireless access points and display the results in a new window.
Steps
To search for wireless access points:
1. Click
Scan Wireless APs
at the bottom of the Wireless Radio screen. Results are
displayed in a new window.
Regulatory Mode
Defines whether Regulatory Mode is set to off, 802.11d, or
802.11h.
Pre-Network Radar Check
Defines the number of seconds to check for radar on a
channel before establishing a network. Current specs specify
60 seconds. Range 0-99. Zero disables checking. Designed
so APs avoid channels that contain radar systems. Used for
802.11h only.
In-Network Radar Check
Defines the number of seconds to check for radar when
switching to a new channel after a network has been
established. Current specs specify 60 seconds. Range: 10-99.
Cannot be disabled. Designed so APs avoid channels that
contain radar systems. Used for 802.11h only.
TPC Mitigation (dB)
Sets TPC Mitigation to 0 (off), 2,3, or 4.
OBSS Coexistence
Enables or disables overlapping BSS coexistence.
STBC Tx
Sets the space-time block codes (STBCs) for the transmitting
antenna.
Apply
Saves all screen changes when clicked.
Restore Wireless Defaults
Restores the factory default settings for wireless
configurations when clicked.
Scan Wireless APs
Scans for other wireless access points and displays channel,
encryption, SSID, RSSI levels, and other information.
Label
Description
