Ubee Interactive
Using the Access Control Option
Ubee DDW3611 Wireless Cable Modem Gateway Subscriber User Guide • November 2012
65
6.3
Using the Access Control Option
The
Access Control
option allows you to configure which clients can access your
wireless network.
Steps
To configure client access:
1. Click
Wireless
from the main menu.
2. Click
Access Control
from the left side menu. Field descriptions are listed below the
screen example.
Label Description
Wireless Interface
Defines the network name for which you are setting access
control parameters.
MAC Restrict Mode
Controls wireless access to your network by MAC address.
Disabled
turns off MAC restrictions and allows any
wireless client to connect to this device. However, if you
use other security mechanisms for access to the wireless
network, clients must still adhere to those restrictions.
Allow
creates a list of wireless clients that can connect to
the wireless network. Enter the MAC addresses of these
clients in the MAC Addresses fields. MAC addresses not
on the list, are not allowed access to your wireless
network.
Deny
creates a list of wireless clients that you do not
want to have access to your wireless network. Enter the
MAC addresses of these clients in the MAC Addresses
fields.
