Ubee Interactive
Connecting Devices to the Network
Ubee DDW365 Wireless Cable Modem Subscriber User Guide • October 2013
10
For MAC OS X, 10.2, and higher: Firefox 1.07 and higher, Safari 1.x and higher.
4. Connect the power cable included in the product package to the back of the DDW365
and plug the other end into the power outlet.
5. Connect the network cable included in the product package to your computer’s
Ethernet port. Connect the other end to the ETH1, ETH2, ETH3, or ETH4 port on the
DDW365.
6. Connect a coaxial cable from the
CABLE
connector on the back of the device to the
cable wall outlet, or to a cable splitter connected to the wall outlet.
7. Validate the network connection using the device LEDs to confirm operations.
The WiFi LED must be flashing or solidly lit.
The PWR, US/DS, and ONLINE LEDs are solidly lit.
Refer to
Understanding LED Behavior on page 5
for more information.
2.2Connecting Devices to the Network
Use the instructions below to connect network devices and validate device functionality.
Topics
See the following topics:
Connecting an Ethernet Device on page 10
Connecting a Wireless Device on page 11
2.2.1
Connecting an Ethernet Device
You can connect up to three additional Ethernet devices to the DDW365.
Steps
To connect another Ethernet device to the network:
1. Connect the Ethernet cable from the Ethernet device (for example, a PC or gaming
console) to an open Ethernet port on the back of the DDW365.
2. Use the device LEDs to confirm operations. Refer to
Understanding LED Behavior on
page 5
for more information.
3. Open a Web browser and go to any Web site to validate network/Internet connectivity
(for example,
http://www.wikipedia.org
).
4. If the connected device is a gaming console, perform any online task supported by the
console (for example, log into the gaming server, play an online game, download
content).
