Ubee Interactive
Using the DMZ Host Option
Ubee DDW365 Wireless Cable Modem Subscriber User Guide • October 2013
50
6.8
Using the DMZ Host Option
Use the
DMZ
(Demilitarized Zone)
Host
option to expose a host IP address to the WAN
(public Internet). You can use this option when applications do not work with port triggers
or other networking strategies.
Steps
To set up a DMZ host:
1. Connect a PC to an Ethernet port on the DDW365. Make sure both devices are
powered on and functioning.
2. Connect a Home Gateway (or other device you wish to be in the DMZ) to an Ethernet
port on the DDW365.
3. Log in to the DDW365 Web user interface.
4. Click
Advanced
from the main menu.
5. Click
DMZ Host
from the left side menu.
6. Enter the IP address of the Home Gateway (host device) to be exposed to the WAN.
7. Test the device to ensure Internet access is available and the device is functional. For
Label Description
Pass Through MAC Addresses
Defines the input host’s MAC address.
Add MAC Address
Adds the input host’s MAC address.
Addresses entered: n/32
Displays the MAC addresses to be blocked. The number of
MAC addresses is shown as 0/32 where 0 is the number of
addresses in the list. You can add up to 32 MAC addresses at
one time.
Remove MAC Address
Removes the input host’s MAC address.
Clear All
Removes all of the input host’s MAC addresses.
