Ubee Interactive
Using the Advanced Gateway Setup IP Filtering Option
Ubee DVW3201B Advanced Wireless Voice Gateway Subscriber User Guide • July 2012
45
5.8
Using the Advanced Gateway Setup IP Filtering Option
The
IP Filtering
option allows you to filter IP addresses to block Internet traffic to specific
network devices on the LAN. Any host on this list is not accessible to Internet traffic.
5.8.1
Using IP Filtering Best Practices
The following are best practices to set up IP filtering.
1. Make sure a PC is connected to the cable modem and both devices are powered on
and functioning.
2. Log in to the cable modem Web user interface. Refer to
Accessing the Web Interface
on page 17
.
3. Go to
Tools
>>
Client
List
. Your PC and other devices are listed. Note the MAC
address and IP address of the devices to which you want to deny Internet access. For
more information, refer to
Using the Client List Option on page 83
.
4. Go to
Gateway
>>
Static
Lease
. Enter the MAC address and IP address of devices to
Label Description
Index
Assigns an index number to the rule.
MAC Address
Defines the MAC address to block.
Clear
Deletes the filtering rule when the Apply button is clicked and
the Clear box is checked.
View Additional Rules:
Displays rules 11-20 when selected from the drop-down list, if
they exist. A total of twenty rules are supported.
Apply
Saves all screen changes when clicked.
