Ubee Interactive
Using the DHCP Option
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide • March 2014
32
5.2
Using the DHCP Option
Use the
DHCP
option to configure dynamic host configuration protocol-specific behavior
on the device.
Steps
To configure DHCP settings:
1. Click
Basic
from the main menu.
2. Click
DHCP
from the left side menu. Field descriptions are listed below the screen
example.
WAN Connection Type
Selects the WAN connection type. For each type, different data
entry is required, as explained below:
DHCP: The WAN interface is set to a DHCP client, and
the IP address is assigned by the service provider’s DHCP
server.
Static IP: For Static IP, you must manually enter the IP
address for the WAN interface.
PPTP (dhcp): For Point to Point Tunneling Protocol
(PPTP), you must enter a username, password, and the
PPTP server’s IP address.
PPTP (static):
L2TP (dhcp):
L2TP (static):
IPv4 MTU Size
Defines the maximum transmission unit (MTU) size. MTU
defines the largest size of the packet or frame that the device
can transfer (256-1500). If this is not given by your service
provider, use 0 for the default.
Apply
Saves changes.
Label
Description
