Ubee Interactive
Using the Options Option
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide • March 2014
41
Remote Config Management
Enables or disables access to the device from a remote
system in order to configure settings. Remote management
can be achieved by using SNMP, web/HTTP or telnet.
Multicast Enable
Optimizes the bandwidth utilization compared with unicast
(especially video streaming applications).
UPnP Enable
Activates Universal Plug and Play (UPnP) when enabled. A
UPnP device can dynamically join a network, obtain an IP
address, convey its capabilities, and learn about other devices
on the network. In turn, a device can leave a network smoothly
and automatically when it is no longer in use. Gaming
consoles and Web cameras are examples of devices that can
use UPnP.
Primary Network Bridged
When enabled, all wireless traffic sourced from the primary
SSID will be bridged.
NAT ALG Status
– Filters to allow (enable) or disallow (disable) protocols to pass through the
DVW326 to connected devices (computers, game consoles, and so on).
RSVP
Enables or disables resource reservation protocol (RSVP).
RSVP defines how applications reserve resources and how
they free the reserved resources once they are no longer
needed.
FTP
Enables or disables the file transfer protocol (FTP) used to
transfer files from one host to another.
TFTP
Enables or disables the trivial file transfer protocol (TFTP) – a
simpler protocol generally used for automated file transfers.
Kerb88
Enables or disables the Kerberos network authentication
protocol which allow nodes to communicate over a non-secure
network using “tickets” on port 88 to prove their identity to one
another.
NetBios
Enables or disables the network basic input/output system
(NetBIOS) services related to the OSI session layer. NetBIOS
allows applications on separate computers to communicate
over a LAN.
IKE
Enables or disables the network key exchange (IKE) protocol
used to set up a security association (SA) in the IPsec protocol
suite.
RTSP
Enables or disables the real time streaming protocol (RTSP)
network control protocol used to establish and control media
sessions between end points.
Kerb1293
Enables or disables the Kerberos network authentication
protocol which allows nodes to communicate over a non-
secure network using “tickets” on port 1293.
H225
Enables or disables the H.225 protocol used to define
messages and procedures for call signaling, media
packetization, and registration, admission, and status (RAS)
functions.
Label Description
