Ubee Interactive
Using the Primary Network Option
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide • March 2014
75
9.2.1
Enabling a Closed Network on the Primary Network
You can enable the Closed Network option so the SSID cannot be broadcast or seen by
others.
Steps
To enable a closed network:
1. Access the pull down menu for the
Closed Network
.
2. Choose
Enabled
to enable a closed network. Automatic Security Configuration is
disabled.
Generate WEP Keys
Forces the device to generate 4 WEP keys automatically.
Apply
Saves changes.
Automatic Security Configuration
— Sets up WPS (Wi-Fi Protected Setup) for devices connecting
to the wireless network.
WPS/Disabled
Enables or disables WPS option. When enabled, the
following fields are available:
WPS Config State
Defines if the WPS has been configured or not.
Device Name
Defines a name for this wireless cable modem for WPS.
WPS Setup AP
UUID
Defines the universal unique identifier (UUID) for this access
point.
PIN
Defines the Personal Identification Number for this access
point.
Generate AP PIN
Creates a new PIN for this access point.
WPS Add Client
Add a client
Activates wireless protected setup (WPS) security on the
device.
To add a client:
1. Click Add a client. The WPS Add Client screen is
displayed.
2. Click PUSH on the WPS Add Client screen.The WPS
button is activated on the device, indicated by a flashing
white light on top of the unit.
3. Press the WPS button on the client device.
Client PIN
Defines a PIN number for client access.
Authorized Client MAC
Defines the MAC address of the authorized client.
Label
Description
