Ubee Interactive
Using the WLAN Option
Ubee UBC1301-AA00 Advanced Wireless Voice Gateway Subscriber User Guide • March 2017
41
6.2.3
Using the DHCP Lease Option
Use the
DHCP Lease
option to view current LAN DHCP lease information.
To view DHCP lease settings:
1. Click
LAN
from the left side menu.
2. Click
DHCP Lease
under LAN.
Field descriptions are listed below the screen example.
6.3
Using the WLAN Option
Use the
WLAN
(wireless local area network) option to configure wireless network settings.
For assistance in deploying and troubleshooting the wireless network, refer to
and Troubleshooting the Wireless Network on page 50
To view and configure wireless information:
Enable Rapid
Commit
Enables Rapid Commit. When enabled, the server recognizes this option in Solicit messages
sent from the DHCPv6 client. The server and client then use a two-message exchange (Solicit
and Reply) to configure clients, rather than the default four-message exchange (Solicit,
Advertise, Request, and Reply). This provides faster client configuration when networks are
under heavy traffic loads.
Enable Unicast
Enables Unicast, which is disabled by default. Unicast transmission is defined to be between a
single sender and a single user over a network.
Save/Apply
Saves changes.
Label
Description
Hostname
Displays the host name.
MAC Address
Displays the IP address of the client.
IP Address
Displays the MAC address of the client.
Expires in
Displays the time until the DHCP lease expires.
Label
Description
