Ubee Interactive
Safety and Regulatory Information
Ubee UBC1301-AA00 Advanced Wireless Voice Gateway Subscriber User Guide • March 2017
2
Do not insert sharp objects into the product’s module openings or empty slots. Doing so
can accidentally damage its parts and/or cause electric shock.
Electrostatic discharge (ESD) can permanently damage semiconductor devices. Always
follow ESD-prevention guidelines for equipment handling and storage.
Use only the power cable included with the device. Do not attach the power supply cable
to building surfaces or floorings.
Rest the power cable freely without any obstacles. Do not place heavy items on
top of the power cable. Do not abuse, step, or walk on the cable.
Do not place heavy objects on top of the device. Do not place the device on an
unstable stand or table; the device can fall and become damaged.
Do not block the slots and openings in the module housing that provide ventilation
to prevent overheating the device. Do not expose this device to direct sunlight. Do
not place hot devices close to this device; it may degrade it or cause damage.
Place the device on a cool surface. Failure to do so may result in overheating
which can cause damage to the unit or furniture.
1.1.2
Eco-Environmental Statements
The following eco-environmental statements apply to the UBC1301-AA00.
Packaging Collection and Recovery Requirements:
Countries, states, localities, or other jurisdictions may require that systems be established
for the return and/or collection of packaging waste from the consumer, or other end user,
or from the waste stream. Additionally, reuse, recovery, and/or recycling targets for the
return and/or collection of the packaging waste can be established. For more information
regarding collection and recovery of packaging and packaging waste within specific
jurisdictions, contact Ubee Interactive at www.ubeeinteractive.com.
1.1.3
Regulatory Statements
The following regulatory statements apply to the UBC1301-AA00.
Industry North America Statement:
This device complies with RSS-210 of the Industry North America Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance
of 20cm between itself and your body. This device must not be co-located with or
operating in conjunction with any other antenna or transmitter.
