Ubee UBC1329AA00 Advanced Wi-Fi 6 Voice Gateway User Manual • February 2021
34
Save Settings
Select to save IPv4 configuration changes.
Restore Default
Settings
Select to restore the factory default IPv4 settings.
IPv6
Link-Local
Gateway Address
Enter the link local gateway address, which is a network address that is valid only for
communication within the local network segment.
Global Gateway
Address
Enter the IPv6 address of the gateway.
LAN IPv6
Address
Assignment
Select the preferred method of IPv6 address assignment. Choices are:
Stateless (Auto-Config):
allows the client device to self-configure its own IPv6
address and routing based on the router advertisements. If stateless is selected,
the address and lease time fields below are not active.
Stateful (Use DHCP Server):
requires a DHCPv6 server to provide the IPv6
address to the client device and that both the client device and the server
maintain, or keep track of, the ‘state’ of the address (such as lease time).
NOTE:
When stateful address assignment is selected, the address fields and lease
time fields below can be configures.
DHCPv6
Beginning
Address
Enter the
beginning
IPv6 address in the pool of addresses that can be used by
connecting clients.
DHCPv6 Ending
Address
Enter the
ending
IPv6 address in the pool of addresses that can be used by
connecting clients.
DHCPv6 Lease
Time
DHCPv6 lease time is the duration of time the gateway ‘leases’ an IPv6 address to a
connected client device. When the lease expires, the client device must connect to
the DHCP server and be issued a new IP address. Enter a number (3 digits maximum)
in the space provided and then select the time duration from the drop down menu.
Options are: Seconds, Minutes, Hours, Days, Weeks and Forever.
Save Settings
Select to save IPv6 configuration changes.
Restore Default
Settings
Select to restore the factory default IPv6 settings.
Label
Description
