#A
#B
#CL
#DL
#DR
#CR
Tools required :
Philips Screwdriver(Not Included)
#A
#B
16pcs shelf pins
4pcs wood shelves
mantel&insert
Part1
Parts list
Part2
Part3
ASSEMBLY
2 shelves can be adjusted in each side cabinet.
Determine the desired height for each shelf. Place 4
pins in pre-drilled holes inside cabinet (make sure
they are aligned), then place wood shelf to rest on
the pins. Repeat step for each shelf.
Completed unit
Note: The insert has been mounted into the mantel before shipment.
INSTALLATION INSTRUCTIONS
3
Plugging in the heater
Note:
1)This heater is for use on 120 Volts.
2)A 15AMP circuit is required to operate this appliance.
If the breaker trips when the appliance is running, you
may need to move the appliance to another location or
unplug other appliances that are on the same circuit.
