Hardware Pack 1
Fig.1
˖
Insert the decorative beam B1 (D1) to A1 (C1); tighten with bolt (CC) & flat washer (BB).
Fig.2
˖
Attach assembled beams to another respectively and tighten with bolt (JJ) & flat washer (BB).
Fig.3
˖
Fix the Middle beam connecter (E1) on the middle of decorative beams by using bolt (CC) & flat
washer (BB).
Fig.4
˖
Fix the Corner connector (G1) on the corner of the decorative beam with bolt (CC) & flat washer (BB).
JJ
1/4"-20*1.25 Hex bolt
8 PCS
BB
1/4" Bigger flat washer
36 PCS
CC
1/4"-20*0.6 Hex bolt
28 PCS
Z
1/4" Wrench
2 PCS
G5 (x2)
Roof cover of short side
I5(x2)
Right roof cover
of short side 2
H5(x2)
Left roof cover of
Short side 2
K5(x2)
Right roof cover
of short side 3
J5(x2)
Left roof cover of
Short side 3
M5(x1) Pothook
L5(X4) Top
cover
A6(x1)
Mosquito
netting
N5(X18)
Roof press sheet
Fig.4-1
˖
Attach Long bar (H1) / Short bar (I1) to Long right decorative beam 1(A1)
& Long right decorative beam 2 (B1) / Short right decorative beam 1 (C1) & Short
right decorative beam 1 (D1) by using bolt (CC) & flat washer (BB).