Hardware Pack 5
BB
1/4" Bigger flat washer
50PCS
DD 1/4"-20*0.6
Bolt
42PCS
GG 1/4"-20*1.6
Bolt
8PCS
Fig.22: Press the he right roof cover of long side 1 (B5) to t left roof cover of long side 1 (A5) as shown
in Fig.22, and insert into the U groove of B2 at the same time, refer drawing Fig.22-1
Fig.23: Install the roof cover of short side (G5) & left roof cover of long side 1 (A5) on the top
slanting bar (A2) with bolt (DD) & washer (BB).
Fig.24: Attach the roof covers C5, D5, E5, F5, H5, I5, J5, K5 to the top slanting bar (A2) with bolt (DD) & washer (BB).
Fig.25: Press up the roof covers with the roof press sheet (N5), and fix N5 on the decorative beam with bolt (DD) &
washer (BB).
Fig.26: Insert the top cover (L5) into the hole of the small top frame corner.
Fig.27: Fix the top cover (L5) on the top slanting bar (A2) with bolt (GG) & washer (BB).
