Uberhaus 15325002, Operator'S Manual

           6

Standby state

Power button

Humidity Up and Down buttons

High wind and Low wind buttons

Timer button

Sleep button

When first plugged in, the unit will emit a beep. The power indicator on the display will turn red and the 
ambient humidity level will appear on the display.

In standby state, press the 

"Power"

 button to start the unit. Press the 

"Power"

 button again to stop the unit.

At initial startup the default is low wind, the default set humidity is RH50%, and the display screen shows 

ambient temperature. If the unit was recently used, the last settings will appear upon startup and will be 
activated.
The

"Power"

indicator is green when the unit is working. When the dehumidifier is turned off but still plugged in, 

the "Power" indicator is red.

4.1: 

After startup, the humidity can be set with the 

"Up"

 and 

"Down"

 buttons in the range of 30%RH-80%RH.

4.2:

 Humidity levels can be set in 5% increments; the maximum level (set with Up button) is 80% RH, and the 

minimum level (set with the Down button) is 30% RH. 

4.3: 

If the "

Up"

 button or 

"Down"

 button is pressed and held, the set humidity increases or decreases in the 

range of 30%RH-80%RH or 80%RH-30%RH.

After startup, if the 

"High"

 wind button is pressed, the fan runs at high wind, if the 

"Low"

 wind button is 

pressed, the fan runs at low wind. In sleep mode, the 

"high wind"

 mode cannot be chosen. The unit runs at low 

wind when in sleep mode.

6.1: Press the 

"Timer"

 button to set timer. To start the unit automatically, set the timer while in standby mode. 

To stop it automatically, set the timer while it is functioning.  The timer can be set in 2-hour increments for a 

maximum of 14 hours, i.e. 2hrs, 4hrs, 6hrs, 8hrs, 10hrs, 12hrs and 14hrs can be set.

6.2: Every time the 

"Timer"

 button is pressed, the timer increases by 2 hours. Press the button 7 times to set 

the timer for 14 hours. The timer indicators on the display will light green according to your setting.

6.3: Cancel timer: once the timer is set up to 14hrs, press the 

"Timer"

once more to cancel this function

7.1: When unit is on standby, the sleep mode cannot be set.