Wipe the exterior surfaces of the heater occasionally with a cloth moistened (not
dripping wet) with a solution of mild detergent and water. Dry the casing thoroghly
with a soft dry cloth before operating the heater. CAUTION: Do not allow water
to run into the interior of the heater as this could create a fire or electric shock
hazard.
The fan motor is factory lubricated for life and will require no further lubrication.
No other user maintenance is required or recommended. If service is required,
bring your heater to the store where it was purchased for a claim within the
Store heater in s clean dry place when not in use.
by using a vacuum cleaner in its blower mode with a crevice tool attachment.
um cleaner using the dusting brush attachment. Interior dust can often be removed
Light accumulated dust may be removed from the heater with a soft cloth or vacu-
before cleaning your heater.
Always disconnect the cord from the electrical outlet and allow heater to cool off
To prevent electric shock, make sure the plug fits in a properly grounded, 3-hole
outlet. This is a safety feature. If the plug should still fail to fit, contact your electrician
to replace your outlet. Do not attempt to defeat this safety feature.
1.
The most common cause of overheating is deposit of dust or fluff entering the heater.
Ensure these deposits are removed regularly by unplugging the unit and vacuuming
the air vents and front grille. If overheating or malfunctions continue, return the heater
to the store where it was purchased for a claim within the warranty period.
2
3
4
5
6
REMEMBER: portable electric heaters are designed for spot heating or as a
supplementary heat source. They are not intended to be main source of heat
during the normal heating season.
Note
: There may be a trace of smoke or odour when unit is first operated. Do not
be alarmed. This indicates that a drop of oil fell on the heating coil during the
manufacturing peocess. It will quickly evaporate and should not re-occur.
IMPORTANT
warranty period.
