Operating Your Refrigerator
TEMPERATURE CONTROL DIAL
The temperature control dial has set-
tings from
• “0” – “7”
• “0” is Off
• "1" is the warmest
• "7" is the coldest
Initially, set the temperature control
dial to "4".
After using the refrigerator for 24
hours, adjust the temperature control
dial to the setting that best suits your
needs. Turning the temperature control
dial ‘O’ stops the cooling cycle; how-
ever, it will not shut off power to the
refrigerator.
Important: If you unplug or turn
off the refrigerator, allow 4 minutes
before restarting it or re-plugging it in.
FREEZER COMPARTMENT & USE
OF THE ICE CUBE TRAYS
This compartment is designed for
making ice cubes and for short-term
food storage (a few days at most).
This compartment is not cold enough
to freeze foods safely for extended
periods of time.
• If ice cube tray freezes to the floor,
pour a little warm water around it to
loosen it. Do not use boiling water,
which can damage plastic parts, or
sharp metal objects such as a knife
or screwdriver, which can damage
the cooling system tubing.
Wash tray in lukewarm water only. Do
not wash in the dishwasher.
DISPENSE-A-CAN
The refrigerator has a convenient
"Dispense-A-Can " storage compart-
ment. Simply stack cans vertically,
loading from the top and drawing
them from the bottom.
SHELVING
The refrigerator has shelves that can
be adjusted to different levels that will
suit your food storage needs. The door
shelves provide storage for small and
large items.
7
Care and Cleaning
Clean the outside of the refrigerator
with a damp cloth and dry thoroughly.
To clean the door gasket, use only
mild soapy water. Never use harsh
cleansers or a scouring pad to clean
any part of the refrigerator. For effi-
cient operation dirt and dust should be
removed from the back every three
months. Turn the temperature control
to the "OFF" position and unplug the
refrigerator. Carefully slide the refriger-
ator away from the wall so as not to
damage the floor below. Wipe dust
from the back of refrigerator with a
clean dry cloth. Use a vacuum cleaner
with a brush attachment to clean the
compressor area.
CLEANING THE OUTSIDE
English
TM
