26
UBI EasyCoder 501 – Technical Manual
The 8 dots/mm printhead can be fitted in two positions. When the
printhead is fitted in the outer, right-hand position (see illustration),
dot No. 0 is situated 3 mm (0.12") inwards from the inner edge of
the paper web. Since the maximum print width is 104 mm (4.1") and
the maximum web width is 120 mm (4.7"), this leaves a margin of
at least 13 mm (0.51") along the outer edge of the web, where no
printing can be performed. Furthermore, if an 110 mm (4.33") wide
web is used, the printhead will be centre-aligned with a 3 mm
(0.12") wide margin on either side.
Print Window:
8 dots/mm (203.2 dpi)
printhead in right-hand position
Continued!
SETUP PARAMETERS, cont'd.
Dot 0
X-start
Width
Origo
Length
Dot 831
WINDOW
WINDOW
PAPER FEED
DIRECTION
Dot-line
on printhead
From
paper supply
13 mm (0.51")
110 mm (4.33")
3 mm (0.12")
max. 120 mm (4.7")
104 mm (4.1")
