27
UBI EasyCoder 501 – Technical Manual
SETUP PARAMETERS, cont'd.
The 11.81 dots/mm printhead should only be fitted in the right-hand
position (see illustration). Dot No. 0 is situated 0.8 mm (0.03")
inwards of the inner edge of the paper web. Since the maximum
print width is 108.3 mm (4.26") and the maximum web width is 120
mm (4.7"), this leaves a margin of at least 10.9 mm (0.43") along
the outer edge of the web, where no printing can be performed.
Print Window:
11.81 dots/mm (300 dpi)
printhead
Continued!
Dot 0
X-start
Width
Origo
Length
Dot 1279
WINDOW
WINDOW
PAPER FEED
DIRECTION
Dot-line
on printhead
From
paper supply
10.9 mm (0.43")
max. 120 mm (4.7")
108.3 mm (4.26")
0.8 mm (0.03")
