54
UBI EasyCoder 501 – Technical Manual
Standard Transfer Ribbons from UBI
(other widths available on special request)
GENERAL PURPOSE
Length 450 m (1475 ft.)
Width:
58 mm (2.28")
88 mm (3.47")
110 mm (4.33")
Part Number:
1-970645-20
1-970645-10
1-970645-01
HIGH PERFORMANCE
Length 450 m (1475 ft.)
Width:
60 mm (2.36")
90 mm (3.54")
110 mm (4.33")
Part Number:
1-970646-20
1-970646-10
1-970646-01
HIGH RESISTANCE
Length 450 m (1475 ft.)
Width:
58 mm (2.28")
88 mm (3.47")
110 mm (4.33")
Part Number:
–
–
1-970647-02
The printer can be set for various types of direct thermal papers, or
combinations of transfer ribbons and receiving face materials, by
means of the setup parameter “Paper Type”.
The printer is fitted with a number of standard thermal paper and
transfer ribbon options, as listed below.
Furthermore, the “New Supplies” setup parameter allows addi-
tional options to be selected by a 13-digit code. Once selected, it can
be reselected as a “Paper Type” option using the first 4 digits of its
code number. The first digit indicates direct thermal paper (0) or
thermal transfer ribbon (1).
In printers not fitted with any thermal transfer ribbon mechanism,
only direct thermal paper options will be displayed.
SELECTING PAPER/RIBBON
Setup Options
STANDARD SETUP OPTIONS
Ribbon Type
Receiving Face Material
Setup Option
General Purpose
Vellum Paper
UBI GP 10
Matt Coated/Transfer Supreme
UBI GP 11
High Performance
Matt Coated/Transfer Supreme
UBI HP 20
Semi Gloss White Paper
UBI HP 21
High Resistance
Matt Synthetic
UBI HR 30
Gloss Synthetic
UBI HR 31
Thermal Transfer Printing
Printhead Warranty:
The use of any thermal transfer ribbon, other than those supplied by
UBI, will invalidate the printhead warranty. UBI thermal transfer
ribbons are engineered specifically for the printhead of EasyCoder
501.
