60
UBI EasyCoder 501 – Technical Manual
Tickets with Gap
PAPER DIMENSIONS, cont'd.
←
a
→
Web Width:
Maximum .................................................. :
120.0 mm
(4.72")
Minimum ................................................... :
25.4 mm
(1.00")
←
b
→
Copy Length:
Max. length between slots (8 dots/mm)
1
..... :
1875 mm
(73.8")
Max. length betw. slots (11.81 dots/mm)
1
... :
1250 mm
(49.2")
Min. length between slots (all) ................... :
10 mm
(0.39")
Max. printable length (8 dots/mm) ............. :
1250 mm
(49.2")
Max. printable length (11.81 dots/mm) ...... :
833 mm
(32.8")
←
c
→
Detection Slit Start:
The restriction of the minimum detection slit length must be observed and
the slit must not break the inner edge of the web.
←
d
→
Detection Slit Length:
The length of the detection slit (excluding corner radii) must be:
Minimum ................................................... :
5.0 mm
(0.20")
←
e
→
Detection Slit End:
Provided the restrictions of the minimum slit length and slit start are
observed, the distance from the inner edge of the web to the outer end of the
slit (excluding corner radius) may be:
Maximum .................................................. :
50.0 mm
(1.97")
←
f
→
Detection Slit Height:
Maximum .................................................. :
10.0 mm
(0.39")
Recommended ........................................... :
1.6 mm
(0.06")
Minimum ................................................... :
1.2 mm
(0.05")
It is recommended not to allow possible perforation to break the edges of the
web. Else there is a small risk that the web may be partly separated before
printing, causing a paper jam.
1
/. The last third of a ticket or tag with
maximum length cannot be used for
printing! Also see “Max. printable
length”.
a
TICKETS & TAGS
e
PAPER FEED
DIRECTION
b
f
d
c
