6. Change the IP Address to a unique IP address. Click Apply.
Note:
If you change the IP settings, the session will
be cut off, and you will need to reconnect to the
EdgeSwitch using the new IP address.
The EdgeSwitch Configuration Interface will appear.
Customize additional settings as needed. For 24V Passive PoE
configuration, refer to “Configuring PoE Settings”. For more
information, refer to the EdgeSwitch documentation, which is
available at www.ubnt.com/download/edgemax
UNMS Management
You can manage your device using UNMS, which lets you
configure, monitor, upgrade, and back up your devices using a
single application. Get started at www.unms.com