background image

54

Appendix F: Declaration of Conformity

airFiber

®

 X User Guide

Ubiquiti Networks, Inc.

Appendix F: Declaration of 
Conformity

Česky  

[Czech]

UBIQUITI NETWORKS tímto prohlašuje, že toto UBIQUITI 

NETWORKS zařízení, je ve shod se základními požadavky a 

dalšími příslušnými ustanoveními směrnice 1999/5/ES.

Dansk 

[Danish]

Hermed, UBIQUITI NETWORKS, erklærer at denne UBIQUITI 

NETWORKS enhed, er i overensstemmelse med de væsentlige 

krav og øvrige relevante krav i direktiv 1999/5/EF.

Nederlands 

[Dutch]

Hierbij verklaart UBIQUITI NETWORKS, dat deze UBIQUITI 

NETWORKS apparaat, in overeenstemming is met de essentiële 

eisen en de andere relevante bepalingen van richtlijn 1999/5/EC.

English

Hereby, UBIQUITI NETWORKS, declares that this UBIQUITI 

NETWORKS device, is in compliance with the essential 

requirements and other relevant provisions of Directive 

1999/5/EC.

Eesti 

[Estonian]

Käesolevaga UBIQUITI NETWORKS kinnitab, et antud UBIQUITI 

NETWORKS seade, on vastavus olulistele nõuetele ja teistele 

asjakohastele sätetele direktiivi 1999/5/EÜ.

Suomi 

[Finnish]

Täten UBIQUITI NETWORKS vakuuttaa, että tämä UBIQUITI 

NETWORKS laite, on yhdenmukainen olennaisten vaatimusten ja 

muiden sitä koskevien direktiivin 1999/5/EY.

Français 

[French]

Par la présente UBIQUITI NETWORKS déclare que l’appareil 

UBIQUITI NETWORKS, est conforme aux exigences essentielles et 

aux autres dispositions pertinentes de la directive 1999/5/CE.

Deutsch 

[German]

Hiermit erklärt UBIQUITI NETWORKS, dass sich dieses UBIQUITI 

NETWORKS Gerät, in Übereinstimmung mit den grundlegenden 

Anforderungen und den anderen relevanten Vorschriften der 

Richtlinie 1999/5/EG befindet.

Ελληνική 

[Greek]

Δια του παρόντος, UBIQUITI NETWORKS, δηλώνει ότι αυτή η 

συσκευή UBIQUITI NETWORKS, είναι σε συμμόρφωση με τις 

βασικές απαιτήσεις και τις λοιπές σχετικές διατάξεις της οδηγίας 

1995/5/ΕΚ.

Magyar 

[Hungarian]

Ezennel UBIQUITI NETWORKS kijelenti, hogy ez a UBIQUITI 

NETWORKS készülék megfelel az alapvető követelményeknek és 

más vonatkozó 1999/5/EK irányelv rendelkezéseit.

Íslenska 

[Icelandic]

Hér, UBIQUITI NETWORKS, því yfir að þetta UBIQUITI NETWORKS 

tæki er í samræmi við grunnkröfur og önnur viðeigandi ákvæði 

tilskipun 1999/5/EC.

Italiano 

[Italian]

Con la presente, UBIQUITI NETWORKS, dichiara che questo 

dispositivo UBIQUITI NETWORKS, è conforme ai requisiti 

essenziali ed alle altre disposizioni pertinenti della direttiva 

1999/5/CE.

Latviski 

[Latvian]

Ar šo, UBIQUITI NETWORKS, deklarē, ka UBIQUITI NETWORKS 

ierīce, ir saskaņā ar būtiskajām prasībām un citiem attiecīgiem 

noteikumiem Direktīvā 1999/5/EK.

Lietuviškai 

[Lithuanian]

UBIQUITI NETWORKS deklaruoja, kad šis UBIQUITI NETWORKS 

įrenginys atitinka esminius reikalavimus ir kitas 1999/5/EB 

Direktyvos nuostatas.

Malti 

[Maltese]

Hawnhekk, UBIQUITI NETWORKS, tiddikjara li dan il-mezz 

UBIQUITI NETWORKS huwa konformi mar-rekwiżiti essenzjali u 

dispożizzjonijiet rilevanti oħrajn ta ‘Direttiva 1999/5/EC.

Norsk 

[Norwegian]

Herved UBIQUITI NETWORKS, erklærer at denne UBIQUITI 

NETWORKS enheten, er i samsvar med de grunnleggende 

kravene og andre relevante bestemmelser i direktiv 1999/5/EF.

Slovensky 

[Slovak]

Týmto UBIQUITI NETWORKS, prehlasuje, že toto UBIQUITI 

NETWORKS zariadenie, je v súlade so základnými požiadavkami a 

ďalšími relevantnými ustanoveniami smernice 1999/5/ES.

Svenska 

[Swedish]

Härmed UBIQUITI NETWORKS, intygar att denna UBIQUITI 

NETWORKS enhet är i överensstämmelse med de väsentliga 

egenskapskrav och övriga relevanta bestämmelser som framgår 

av direktiv 1999/5/EG.

Español 

[Spanish]

Por medio de la presente UBIQUITI NETWORKS declara que este 

dispositivo UBIQUITI NETWORKS, cumple con los requisitos 

esenciales y cualesquiera otras disposiciones aplicables o 

exigibles de la Directiva 1999/5/CE.

Polski  

[Polish]

Niniejszym, Ubiquiti Networks, oświadcza, że   urządzenie 

UBIQUITI NETWORKS, jest zgodny z zasadniczymi wymaganiami 

oraz pozostałymi stosownymi postanowieniami Dyrektywy 

1999/5/EC.

Português 

[Portuguese]

UBIQUITI NETWORKS declara que este dispositivo UBIQUITI 

NETWORKS, está conforme com os requisitos essenciais e outras 

disposições da Directiva 1999/5/CE.

Română 

[Romanian]

Prin prezenta, UBIQUITI NETWORKS declară că acest dispozitiv 

UBIQUITI NETWORKS este în conformitate cu cerințele esențiale 

și alte prevederi relevante ale Directivei 1999/5/CE.

Summary of Contents for AF-3X































































Reviews: