![background image](http://html1.mh-extra.com/html/ubiquiti/edgeswitch-es-16-150w/edgeswitch-es-16-150w_quick-start-manual_3149380007.webp)
For information about compatible fiber SFP modules, visit:
ubnt.link/SFP_DAC_Compatibility
Accessing the Configuration Interface
By default, the EdgeSwitch will try to get its IP address automatically using DHCP. If
that fails, then it will use the default fallback IP address, 192.168.1.2. Proceed to the
appropriate section, DHCP or
DHCP
Use one of the following methods:
Set up the DHCP server to provide a specific IP address to the EdgeSwitch based on
its MAC address (on the label).
Let the EdgeSwitch obtain an IP address and then check the DHCP server to see
which IP address was assigned.
To log in, follow these steps:
1. Launch your web browser. Type the appropriate IP address in the address field.
Press enter (PC) or return (Mac).
2. Enter ubnt in the Username and Password fields. Click Sign In.
3. The EdgeSwitch Configuration Interface will appear. Customize additional settings as
needed.
ES-16-150W Quick Start Guide