6. Configure the following settings:
a. For one device, enable Access Point mode. For the other device (the Station), keep
Access Point disabled.
b. Enter a name in the SSID field. This must be the same on both the AP and the Station.
c. In the WPA2 Preshared Key field, enter a combination of alphanumeric characters (0-
9, A-Z, or a-z).
7. Click Save Changes.
8. Configure each device (AP and Station) with a unique IP address:
a. Click the icon.
Note:
The key is an alphanumeric password between 8 and 63 characters
long.
GBE Quick Start Guide