LEDs
Ethernet
The LED will light steady blue when an
active Ethernet connection is made and flash when
there is activity.
Power
The LED will light blue when the device is
connected to a power source.
Button
Reset
To reset to factory defaults, press and hold the Reset
button for more than 10 seconds while the LiteBeam is
powered on. The LiteBeam may also be reset remotely using
the auxiliary Reset button located on the bottom of the Gigabit
PoE adapter.
Port
Ethernet
Supports 10/100/1000 connections and passive PoE.
This port should be connected to the LAN and DHCP server.