LTU-Pro Quick Start Guide
http://dl-origin.ubnt.com/qsg/LTU-Pro/LTU-Pro_EN.html[05.02.2020 14:09:00]
GPS LED
UNMS LED
LAN LED
Power LED
PoE In [24V] Port
Blue
The LED will light blue when the link is active.
Blue
The LED will light blue when the GPS signal strength is
sufficient. This requires a minimum of three satellite
connections.
Flashing White
Bootup in progress.
White
Ready for use, not connected to Ubiquiti® Network
Management System (UNMS™). See
Blue
Ready for use, connected to UNMS.
Steady Blue with Occasional
Flashing
Ready for use, unable to connect to UNMS, check
connection to UNMS server.
Quickly Flashing Blue
Used to locate a device in UNMS.
Alternating
Blue/White
Firmware upgrade in progress.
Blue
The LED will light steady blue when an active Ethernet
connection is made to the Ethernet port and flash when
there is activity.
Blue
The LED will light blue when the device is connected to a
power source.
This 10/100/1000 Ethernet port is used to connect the power and should be connected to
the LAN and DHCP server. Default IP address: 192.168.1.20
Pole Mounting
1.
