LTU-Pro Quick Start Guide
http://dl-origin.ubnt.com/qsg/LTU-Pro/LTU-Pro_EN.html[05.02.2020 14:09:00]
The LTU Configuration Interface will appear, allowing you to customize your settings as
needed. To have your AP configure your device, proceed to
.
UNMS Management
You can manage your device using UNMS, which lets you configure, monitor, upgrade, and
back up your devices using a single application. Get started at
Find My AP
1. Click the
icon.
2. In the Wireless Settings section, change the channel bandwidth (default: 20 MHz) as
needed.
Note:
If the AP’s channel bandwidth is set to 50 MHz and your device is set to
20 MHz, then your device will not see that AP and you should change the channel
bandwidth on your device.
