5. Bend and form the wires to fit into the wall box. Ensure the
wires are properly positioned to allow adequate room for
the mFi Outlet.
6. Place the mFi Outlet inside the wall box and ensure the
yoke is mounted flush with the wall for proper fitting of the
Wall Plate. Secure the mFi Outlet with the two screws.
Note:
Do not over-tighten or rely on the force of
the screws to pull the mFi Outlet into the wall
box. If the wall box does not have enough room
to accommodate the mFi Outlet and the wiring,
replace the wall box with a deeper or wider box.