LEDs
Power
The Power LED will light blue when the
device is connected to a power source.
Main
Main
The LED will light steady blue when an active
Ethernet connection is made to the Main port and
flash when there is activity.
LAN2
LAN2
The LED will light steady blue when an active
Ethernet connection is made to the LAN2 port and
flash when there is activity.
Signal
In airOS
®
, you can modify the threshold
value for the wireless signal strength LEDs on the
Wireless tab under Signal LED Thresholds. Each LED
will light when the wireless signal strength is equal
to or greater than the LED’s threshold value. The
default threshold values for these LEDs are shown
below:
-94 dBm -80 dBm -73 dBm -65 dBm
