LED Panel
Power
The Power LED will light blue when
the device is connected to a power source.
Main
Main Ethernet
The LED will light steady
blue when an active Ethernet connection is
made to the Main/LAN port and flash when
there is activity.
Secondary
Secondary Ethernet
The LED will light
steady blue when an active Ethernet
connection is made to the Secondary port
and flash when there is activity.
Signal
In airOS®, you can modify the
threshold value for the wireless signal
strength LEDs on the Wireless tab under
Signal LED Thresholds. The LED will light
when the wireless signal strength is equal
to or greater than the LED’s threshold value.
The default threshold values for these LEDs
are shown below:
-94 dBm
-80 dBm -73 dBm
-65 dBm
