LED Panel
Power
The Power LED will light green when
the device is connected to a power source.
LAN1
Main Ethernet
The LED will light steady green
when an active Ethernet connection is made
to the Main/LAN port and flash when there is
activity.
LAN2
Secondary Ethernet
(NanoStation M2/M3/M5
only) The LED will light steady green when
an active Ethernet connection is made to the
Secondary port and flash when there is activity.
Signal
In airOS, you can modify the wireless
signal strength threshold values for each
LED on the Advanced tab under Signal LED
Thresholds. The default values are shown below:
LED will light red when the wireless
signal strength is above ‑94 dBm.
LED will light amber when the wireless
signal strength is above ‑80 dBm.
LED will light green when the wireless
signal strength is above ‑73 dBm.
LED will light green when the wireless
signal strength is above ‑65 dBm.
