PBE-5AC-Gen2 Quick Start Guide
https://dl.ubnt.com/qsg/PBE-5AC-Gen2/PBE-5AC-Gen2_EN.html[4/17/2020 8:58:22 AM]
Installation Requirements
13 mm wrench
Shielded Category 5 (or above) cabling with drain wire should be used for all wired Ethernet connections and should be grounded
through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-
grade, shielded Ethernet cable from Ubiquiti. For more details, visit
Surge protection should be used for all outdoor installations. We recommend that you use two Ethernet Surge Protectors, model ETH-
SP, one near the PowerBeam and the other at the entry point to the building. The ETH-SP will absorb power surges and safely
discharge them into the ground.
Hardware Overview
Bottom View
