Accessing airOS via Wi‑Fi
Verify connectivity in the airOS Configuration Interface. There
are two methods, the U Mobile App and Web Portal. Both are
available for 15 minutes immediately after you power on the
PowerBeam. If necessary, you can power cycle the PowerBeam
to re‑enable its Wi‑Fi.
Proceed to the appropriate instructions:
U Mobile App
1. Download the U Mobile app from the App Store (iOS) or
Google Play
™
(Android).
2. Connect your device’s Wi‑Fi to the PowerBeam SSID
named: PBE-5AC-Gen2:<MAC Address>
Note:
Ensure that DHCP is enabled on your
Wi‑Fi adapter.
3. Launch the app.
4. Tap the PowerBeam on the Connections screen.
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com