background image

Returns

No Products will be accepted for replacement or repair without obtaining 
a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS 
during the warranty period, and the Products being received at UBIQUITI 
NETWORKS’ facility freight prepaid in accordance with the RMA process of 
UBIQUITI NETWORKS. Products returned without an RMA number will not 
be processed and will be returned freight collect or subject to disposal. 
Information on the RMA process and obtaining an RMA number can be 
found at: www.ubnt.com/support/warranty

Disclaimer

EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI 
NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, 
SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM AND MAKE NO 
OTHER REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED 
OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, REPRESENTATIONS, 
GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, ACCURACY, QUALITY 
OF SERVICE OR RESULTS, AVAILABILITY, SATISFACTORY QUALITY, LACK OF 
VIRUSES, QUIET ENJOYMENT, FITNESS FOR A PARTICULAR PURPOSE AND 
NON‑INFRINGEMENT AND ANY WARRANTIES ARISING FROM ANY COURSE 
OF DEALING, USAGE OR TRADE PRACTICE IN CONNECTION WITH SUCH 
PRODUCTS AND SERVICES. BUYER ACKNOWLEDGES THAT NEITHER UBIQUITI 
NETWORKS NOR ITS THIRD PARTY PROVIDERS CONTROL BUYER’S EQUIPMENT 
OR THE TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING 
THE INTERNET, AND THAT THE PRODUCTS AND SERVICES MAY BE SUBJECT 
TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS AND OTHER 
PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS FACILITIES. UBIQUITI 
NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD PARTY PROVIDERS 
ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS, DELAYS, CANCELLATIONS, 
DELIVERY FAILURES, DATA LOSS, CONTENT CORRUPTION, PACKET LOSS, OR 
OTHER DAMAGE RESULTING FROM ANY OF THE FOREGOING. In addition, 
UBIQUITI NETWORKS does not warrant that the operation of the Products will 
be error‑free or that operation will be uninterrupted. In no event shall 
UBIQUITI NETWORKS be responsible for damages or claims of any nature or 
description relating to system performance, including coverage, buyer’s 
selection of products (including the Products) for buyer’s application and/or 
failure of products (including the Products) to meet government or regulatory 
requirements.

Limitation of Liability

EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL 
UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR 
DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES 
(INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING OUT 
OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE PRODUCT, 
WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, 
AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

 

Summary of Contents for PowerBeam AC PBE-5AC-620





























Reviews: