25.02.2020
PBE-5AC-500-ISO Qu ck Start Gu de
https://dl.ubnt.com/qsg/PBE-5AC-500-ISO/PBE-5AC-500-ISO_EN.html
13/20
Connect ng to the PoE Adapter
1. Connect the Ethernet cable from the dev ce to the POE port of the PoE adapter.
2. Connect an Ethernet cable from your LAN to the LAN port of the PoE adapter.
3. Connect the Power Cord to the adapter, and then plug the Power Cord nto a power
outlet.
Mount ng the PoE Adapter (Opt onal)
1. Remove the PoE Mount ng Bracket from the adapter, place the bracket at the des red
locat on, and mark the two holes.
2. Pre-dr ll the holes f necessary, and secure the bracket us ng two fasteners (not
ncluded).
3. Al gn the adapter’s slots w th the tabs of the PoE Mount ng Bracket, and then sl de
the adapter down.
Access ng a rOS
Connect to the a rOS® Conf gurat on Interface.
1. Make sure that your host mach ne s connected v a Ethernet to the dev ce.
2. Conf gure the Ethernet adapter on your host system w th a stat c IP address on the
192.168.1.x subnet.
3. Launch your web browser. Type https://192.168.1.20 n the address f eld. Press enter
(PC) or return (Mac).
PBE-5AC-500-ISO Qu ck Start Gu de
