Introduction
Thank you for purchasing the Ubiquiti Networks®
PowerBeam
™
ac Omni Gen 2
. This Quick Start Guide is
designed to guide you through installation and also includes
warranty terms.
Package Contents
Antenna
Feed with Omni
Rear
Housing
Mounting
Bracket
Pole Clamp
U-Bolt
Bolts (Qty. 4)
Flange Nuts (Qty. 2)
Washers (Qty. 2)
5 GHz High‑Performance
airMAX® ac Gen 2 Radio Bridge
Model: PBE‑5AC‑Omni‑Gen2
Gigabit PoE Adapter (24V, 0.5A)
with Mounting Bracket
Power
Cord
Quick Start
Guide
Installation Requirements
• Phillips screwdriver
• 10 mm wrench
• Shielded Category 5 (or above) cabling should be used for
all wired Ethernet connections and should be grounded
through the AC ground of the PoE.
We recommend that you protect your networks from the
most brutal environments and devastating ESD attacks
with industrial-grade shielded Ethernet cable from Ubiquiti
Networks. For more details, visit www.ubnt.com/toughcable
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet
cable and earth grounding must be used as conditions of product warranty. TOUGHCable
™
is designed for outdoor installations. It is the customer’s responsibility to follow local country
regulations, including operation within legal frequency channels, output power, and Dynamic
Frequency Selection (DFS) requirements.
