28/09/2020
R2AC-PRISM Quick Start Guide
https://dl.ubnt.com/qsg/R2AC-PRISM/R2AC-PRISM_EN.html
13/20
Mounting the PoE Adapter (Optional)
1. Remove the PoE Mounting Bracket from the adapter, place the bracket at the desired
location, and mark the two holes.
2. Pre-drill the holes if necessary, and secure the bracket using two fasteners (not included).
3. Align the adapter’s slots with the tabs of the PoE Mounting Bracket, and then slide the
adapter down.
Accessing airOS via Wi-Fi
Verify connectivity in the airOS® Con guration Interface using the UNMS™ app or Web
Portal. Both are available for 15 minutes immediately after you power on the device. If
necessary, you can power cycle the device to re-enable its Wi-Fi.
UNMS App
1. Download the UNMS app.
2. Connect your device’s Wi-Fi to the SSID named: <model>:<MAC Address>
3. Launch the app and follow the on-screen instructions.
Web Portal
1. Connect your device’s Wi-Fi to the SSID named: <model>:<MAC Address>
Note:
Ensure that DHCP is enabled on your Wi-Fi adapter.
R2AC-PRISM Quick Start Guide
