9
Accessing the Configuration Interface
4. Change the Static Management IP Address to a unique IP
address on the Device tab. Click Save Changes.
5. You can enable PoE on the Ports tab and customize additional
settings as needed.
6. Disconnect the Ethernet cable from the Management port of
TOUGHSwitch A and connect it to the Management port of
TOUGHSwitch B. Then repeat steps 1-5 on TOUGHSwitch B.
Refer to the TOUGHSwitch PoE User Guide for instructions on
configuring the TOUGHSwitch. The User Guide is available at
documentation.ubnt.com/toughswitch
Summary of Contents for TS-16-CARRIER
Page 1: ...Rackmount Power over Ethernet Managed Switches Model TS 16 CARRIER ...
Page 2: ......
Page 19: ......