background image

Industry Canada

CAN ICES-3(A)/NMB-3(A)

This Class A digital apparatus complies with Canadian ICES-003.
To reduce potential radio interference to other users, the antenna type and 
its gain should be so chosen that the equivalent isotropically radiated power 
(e.i.r.p.) is not more than that permitted for successful communication.
This device complies with Industry Canada licence-exempt RSS standard(s). 
Operation is subject to the following two conditions: 
1.  This device may not cause interference, and 
2.  This device must accept any interference, including interference that 

may cause undesired operation of the device.

This radio transmitter (IC: 6545A-UAPACMPRO) has been approved by 
Industry Canada to operate with the antenna types listed below with the 
maximum permissible gain and required antenna impedance for each 
antenna type indicated. Antenna types not included in this list, having a 
gain greater than the maximum gain indicated for that type, are strictly 
prohibited for use with this device.
Antenna Information: Dual-band antenna, Gain: 8 dBi

CAN ICES-3(A)/NMB-3(A)

Cet appareil numérique de la classe A est conforme à la norme NMB-003 
du Canada.
Pour réduire le risque d’interférence aux autres utilisateurs, le type 
d’antenne et son gain doivent être choisies de façon que la puissance 
isotrope rayonnée équivalente (PIRE) ne dépasse pas ce qui est nécessaire 
pour une communication réussie. 
Cet appareil est conforme à la norme RSS Industrie Canada exempts de licence 
norme(s). Son fonctionnement est soumis aux deux conditions suivantes:
1.  Cet appareil ne peut pas provoquer d’interférences et 
2.  Cet appareil doit accepter toute interférence, y compris les 

interférences qui peuvent causer un mauvais fonctionnement du 
dispositif.

Cet émetteur radio (IC: 6545A-UAPACMPRO) a été approuvée par Industrie 
Canada pour l’exploitation avec l’antenne types énumérés ci-dessous avec 
le gain maximal admissible et requis l’impédance de l’antenne pour chaque 
type d’antenne indiqué. Types d’antenne non inclus dans cette liste, ayant 
un gain supérieur au gain maximal indiqué pour ce type, sont strictement 
interdits pour une utilisation avec cet appareil.
Informations d’antenne: Antenne bi-bande, Gain: 8 dBi

                    Available from A1 Security Cameras 

     www.a1securitycameras.com   email: sales@a1securitycameras.com

Summary of Contents for UAP-AC-M-PRO





























Reviews: