18
Chapter 3: Using the UniFi Controller Software
UniFi
™
AP-PRO and AP-AC User Guide
Ubiquiti Networks, Inc.
-
WPA-Personal
WPA™ or Wi-Fi Protected Access was
developed as an encryption method stronger than
WEP. WPA-Personal requires a passphrase to connect
to the wireless network.
•
Security Key
Enter the passphrase that users will
use to connect to the wireless network.
-
WPA-Enterprise
WPA Enterprise uses a RADIUS
server to authenticate users on the wireless network.
•
IP Address
This is where the IP address of the
RADIUS server is specified.
•
Port
The port number is entered here. By default it
is 1812.
•
Password
The password used to authenticate on
the RADIUS server is entered here.
•
Guest Policy
Select this option to enable guest access
policies on this wireless network.
Advanced
•
VLAN
To use a VLAN, select
Use VLAN ID
and enter the
port number.
•
Hide SSID
Select this option if you don’t want the SSID
to be broadcast.
•
WPA
Defines supported WPA and encryption methods.
•
User Group
Allows assignment of wireless users to a
specific user group.
Click
Apply
to save any changes that you have made.
Click
Cancel
to discard changes.
Settings > Blocked Devices
Displays the list of blocked wireless devices.
Unblock
Click to unblock a wireless device. See
“User/
Guest Details” on page 44
for information on blocking
wireless devices.
Settings > User Groups
Create
Click to create a new user group.
•
Name
Enter a descriptive user group name.
•
Bandwidth Limit (Download)
When selected, allows
the designation of a download bandwidth limit in Kbps.
•
Bandwidth Limit (Upload)
When selected, allows the
designation of an upload bandwidth limit in Kbps.
-
Create
Click to create a user group.
-
Cancel
Click to cancel user group creation.
Edit
Click to change the name or bandwidth settings of
the user group.
Delete
Click to delete the user group.
See
“Configuration” on page 45
for information on the
application of User Groups to Users/Guests.
