41
Chapter 10: Access Point Details
UniFi
™
AP-PRO and AP-AC User Guide
Ubiquiti Networks, Inc.
Access Point - Isolated
When an Access Point is in an
Isolated
state, you can
reestablish a connection to the UniFi Controller software
using one of two methods:
• Reconnect the Access Point to the router.
• Connect an Ethernet cable from the
Secondary Ethernet
Port
of the isolated Access Point to the
Secondary
Ethernet Port
of another UniFi AP that is connected to
the router.
Isolated Access Point
In an
Isolated
state, the Access
Point icon will change to red/orange on the
Map
tab.
or
The LED on the actual device will be steady green with
occasional flashing. This Access Point doesn’t provide any
wireless service.
Note:
Do not use the
Forget this AP
option when the
Access Point is in an
Isolated
state. If you do, then the
only way to make the Access Point accessible from
the UniFi Controller is to take it down and connect it
by wire.
Access Point - Managed by Other
When an Access Point is in
Managed by Other
state, this
indicates that the Access Point is not in the default state
but it is not controlled by the UniFi Controller.
Overview
MAC address
Displays the MAC address of the Access
Point.
Model
Displays the model information.
Version
Displays the version of software used on the
Access Point.
Last Seen
Displays the amount of time that has passed
since the Access Point was last seen.
